How To Fix Common Printer Error Codes For Brother Multifunction Printers Article

	1888 Articles Home \| Computer Articles \| Hardware Articles	Hardware RSS
How to Fix Common Printer Error Codes for Brother Multifunction Printers

Have you ever encountered a printer error code while using your Brother multifunction printer? Chances are that you have. It is not that the Brother multifunction printer is an inferior machine.

Author: James Kara Murat

Article Tools:

Have you ever encountered a printer error code while using your Brother multifunction printer? Chances are that you have. It is not that the Brother multifunction printer is an inferior machine; in fact, it is one of the best multifunction printers out there. But just like any machine, it can bog down. And when it does, a printer error code might pop up on your computer screen or on the LCD control panel of the printer.

What are the common printer error codes of Brother multifunction printers and how can we fix them? Here is a list of these common printer error codes.

• Error Code S05. A printer error code like this happens when the transfer of data via the parallel port is not going smoothly. Just reset your printer to get it going again.

• Error Code E50. This printer error code flashes when the fuser unit of your Brother multifunction printer gets damaged. When this happens, it is a signal that you must replace your printer’s fuser unit.

• Error Code E51. When the printer’s laser beam, lid or mirrors are not placed in their appropriate positions, it results in this printer error code. Please check if ink cartridges and everything in your printer is where it should be before you start using it again.

• Black pages. Sometimes, the message “Black pages" can flash on the screen, or a black page is actually being printed out. In this case, you would need to take your printer to a service center and replace its jumper wires and diodes.

• Check paper path. When this message shows up, it means that your Brother printer has a dirty or misaligned eject roller. Clean it or straighten it up, whichever is necessary, and then try printing again.

• Poor quality of copy. When the output of your Brother multifunction printer, be it the printout or the fax, is smudgy, it could be because the scanning mirrors or the glass is dirty. Clean them up if they are. However, if these are clean, then the problem could be your printer’s camera. You can try out unplugging your printer for a few hours, but if the problem persists, you may have to go to a service center to get your printer’s camera replaced.

About Author

James Kara Murat the contributor of compatible ink cartridges. More information on the subject is at How to Fix Common Printer Error Codes for Brother Multifunction Printers, and related resources can be found at Brother Ink Cartridges.

Article Source: http://www.1888articles.com/author-james-kara-murat-9121.html